Engineering Properties

Welcome to the Engineering Properties section. The latest articles for this section are displayed below:

Novel solid-lubricant materials for multifunctional applications

Surojit Gupta, M. F. Riyad, Sujan Ghosh, and Ross Dunnigan
10 May 2016
The addition of thermodynamically stable nanolaminates to thermosets and thermoplastics improves the performance of polymer matrix composites.

Polyacrylamide-montmorillonite composite with improved properties

Tian-Hong Zhao, Ji-Yue Xing, Wan-Fen Pu, Zhi-Ming Dong, Cheng-Dong Yuan, Fa-Yang Jin, Guo-Feng Peng, and Ji-Jia Xia
3 May 2016
The high water absorption rates and poor long-term stability in high salinity of polymer-montmorillonite composites are ameliorated by introducing a polymerizable cationic hydrophobic monomer.

Carbide slag as a filler in poly(vinyl chloride)/wood composites

Shenghui Tian and Hui He
13 April 2016
Using an industrial waste as an inorganic filler in plastic/wood composites improves the fire and mechanical properties of the material, as well as reducing its financial and environmental cost.

High-strain-rate testing of reinforced polyetherether ketone

Stuart Brown and Jorgen Bergstrom
6 April 2016
A variety of techniques are used to test and understand how fiber-filled thermoplastics behave when impacted or subjected to high rates of deformation.

Highly flame retardant green composites using seashells

Hesham Moustafa, Nabila A. Darwish, Sophie Duquesne, and Ahmed M. Youssef
31 March 2016
Using ground seashell as a biofiller in an acrylonitrile butadiene styrene copolymer increases flame retardance.

Enhancing the dimensional stability and durability of wood polymer composites

Kaili Wang, Youming Dong, Yutao Yan, Shifeng Zhang, and Jianzhang Li
24 March 2016
Grafting polystyrene onto wood cell walls improves the interfacial compatibility between polymer and wood, and thus gives rise to better mechanical and hydrophobic properties.

New method for the design of high-performance polypropylene

Shuai Zhou and Zhong Xin
18 March 2016
Beta-form polypropylene can be produced through the introduction of a branching molecular architecture and by conducting crystallization under shear and rapid cooling conditions.

Predicting flow-induced stress during injection/compression molding

Wei Cao, Qian Zhang, Yanhui Qi, Guixiang Lu, and Changyu Shen
11 March 2016
A new approach, which combines the eXtended Pom-Pom finite element model and an arbitrary Lagrangian-Eulerian technique, is used to simulate stress levels at different points in a molded part.

Functional gradient scaffolds capable of dual drug spatiotemporal release

Yuanyuan Liu, Hongchen Yu, Yi Liu, Gang Liang, Ting Zhang, and Qingxi Hu
4 March 2016
A novel 3D bio-printing platform is integrated with a forming system that combines electrospinning and extrusion deposition to prepare drug-loaded structures.

Fabrication of poly(lactic acid) composites with improved tensile strength

Widsanusan Chartarrayawadee
24 February 2016
Functionalizing graphene oxide with steric acid increases its compatibility with poly(lactic acid), leading to improved tensile strength composites.

Footer Links (2nd Row)